This patient presented with severe pain to biting and cold on his upper right first premolar tooth. CT scan confirmed fracture and angular bone loss. Tooth non-restorable-extracted and implant placed. New computer designed 3D printed tooth looks great and he can eat again on the right side.
This patient presented with a broken off upper right bicuspid tooth. The tooth was extracted and implant placed. Following healing I delivered a beautiful computer designed-3D printed, screw retained zirconia/titanium implant abutment and crown- awesome!!!
For this implant bridge case I digitally scanned in the impression of his teeth, implant abutments, and bite. Then computer designed and 3D printed out the bridge. Then screwed it into his mouth. Turned out perfect and the patient was very pleased :-)))
This patient presented with a broken lower implant. I originally restored this implant crown a few years ago, and I was quite surprised and curious as to why it broke. This is very rare, and I used all the best, highest quality, Swiss made, Straumann Implant parts. The implant porcelain crown and titanium abutment broke apart leaving the screw still in the implant. She clenches and grinds her teeth, but still, this should not have occurred. I redid the implant crown and did not charge the patient. These are the clinical pictures:
On this patient I noticed decay under two 20 year old crowns on teeth #30 and 31. Removal of the old crowns revealed tooth #30 with deep decay sub-gingival into the root furcation. This tooth was non-restorable. I recommended extraction and an implant. For tooth #31, I was able to clean out the decay and do a crown build-up and make her a new crown.
The first x-ray above shows my initial try-in with a gap between the implant crown and implant. The crown would not fully seat, so I re-did the implant crown. The second x-ray, after re-doing the implant crown, shows a perfect fit!!! Both the implant crowns #30 and #31 fit and look beautiful.
This patient presented with a broken implant crown. It was done 20 years ago in Los Angeles, California. What made this case interesting is that the dentist had retired and there was no record of the type or size of the implant. I sent pictures to different implant companies, but none were familiar with the design. I eventually figured out the implant manufacturer, but after checking, discovered they were no longer in business. Another complication was that the screw was stripped and difficult to remove. Eventually after trying different sized external hexed implant fixtures, I was able to get one to fit and made a beautiful new implant crown. Here’s the clinical photos:
For this patient, we were unable to save her back right lower molar. We extracted the tooth and placed a dental implant. Here are the clinical photos:
This patient had a fractured molar that we tried to save with a root canal. The root fracture was too large and we were unable to save and restore the tooth. So I recommended to extract the tooth and placed a dental implant. Turned out fantastic and the patient is very happy he can chew again on his left side :-)))